Go Bottom

---

Kuboto B2710

Jim Join Date: Posts: 1

1999-01-31          972

I am interested in purchasing a Kuboto, Model # B2710, however, I'm concerned about having adequate leg room when operating this tractor, since I am 6'2" tall. If anyone has any information as to how far back the seat goes to accomodate tall people, I would appreciate hearing from you. Thank you, Jim from Illinois.

Reply to | Quote Reply | Add Photo

---

Kuboto B2710

dennis Join Date: Mar 2004 Posts: 0 NY

1999-01-31          973

Jim,The B and Grand L series tractors place the operator in a seated position that puts foot to knee angle close to 90 % this is no sports car where long legs and steering wheel are an issue, the floor is also Flat so moving your legs around is no problem. Unless you have an extremely long legs for your 6' 2" height or weigh over 275 lbs you should have absolutely no problem. ....

Reply to | Quote Reply | Add Photo

---

Kuboto B2710

Jim from Illinois Join Date: Posts: 1

1999-01-31          974

Thank you Dennis for your valuable information. We plan on purchasing a Kubota tractor B2710 which hopefully will be available in late February or early March. ....

Reply to | Quote Reply | Add Photo

---

Kuboto B2710

Nat in Ohio Join Date: Posts: 1

1999-02-01          977

I am also 6'2" and have a B2400. In my opinion the hydro pedal placement requires my knee to be bent too much (less than 90 degrees) and I find that after 1-1.5 hours my knee becomes very stiff and the first few steps are a little painful. The "cruise control" isn't that helpful because of the speed changes required to accomodate trimming. Perhaps it's the fault of my knees or old age creeping up... ....

Reply to | Quote Reply | Add Photo

---

Kuboto B2710

guest Join Date: Aug 2017 Posts: 0

1999-02-02          995

I am 6'3" and just got a L3010 I don't have any trouble with the leg room. I have size 13 feet and wear boots and it took me a little while to get use to the Hydro pedal but once I figured it out it is great.I would have waited for the 2710 but the 1500 savings and the time to ship (at least 3 months if on the waiting list) made me move up to a little more power. I am very happy with it so far. ....

Reply to | Quote Reply | Add Photo

---

Kuboto B2710

Bob Murray Join Date: Posts: 1

1999-05-23          4224

I am looking for complete plows in good condition located in Ontario Canada. ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !